Before deciding on what Acoustical Door seals are right for your next project, make sure that you measure your doors to know what you need. Acoustical Surfaces features adjustable dimmed to exactly fit any door for your next project. Some of the benefits of these door seals include:
- Reduces Sound Through Door Seals
- Easy to Install
Close door completely.
Using a sharp pencil, make small marks on the door as shown to the left. Mark both left and right side of door. Your automatic door bottom will be installed between these marks, so be sure to make marks dark enough to see, but light enough to erase. When the door bottom is finally installed, it should be approx 1/8″ short of the lines on each side
Using a tape measure, carefully measure the distance between the two marks.
This measurement notes a distance 35-3/8″. For this door a 36″ door bottom would be appropriate because it can be trimmed up to 3″.
Note: All door seals over 24″ can be trimmed up to 1″ & door seals that are 36″ or 42″ can be trimmed up to 3″.
Some field trimming may be necessary for the best fit. For best cut, pull neoprene gasketing out of housing and cut with a compound miter saw/chop saw.
**Do not cut neoprene gasketing until you are sure the door bottom fits exactly.